Brother DCP-7060D driver

Brother DCP-7060D model of printer uses an electrophotographic print technology with a laser print method. It has the modern ARM9 processor with a speed of 200 MHz and an internal memory capacity of 32 MB of RAM. Also, the input tray can hold up to 250 sheets of plain paper at an ab=verage weight of 20 lbs. Brother DCP-7060D printer also has a manual feed slot that accommodates one layer at a time of the same paperweight. The output tray holds up to 100 printed sheets in a face-down pattern except for one sheet in a face-up.

Brother DCP-7060D driver Supported Windows Operating Systems

Brother DCP-7060D driver Supported Mac Operating Systems

Specifications

The display screen is of the liquid crystal display (LCD) type which supports 16 characters and two lines. This LCD component also has a width of 1.85 inches and a length of 0.43 inches. Other media specifications include the support for plain, thin, thick, and recycled papers. This printer also has the automatic duplex feature that permits printing on both sides of the page. The acceptable media weight is between 60 and 105 gsm (that is, 16 to 28 lbs).

The printer works a minimum resolution of 600 x 600 dots per inch (dpi) while the maximum is 2400 x 600 dpi. During the copying process, the standard wake up time from ready mode is less than 11 seconds. However, when waking up from sleep mode, the wake-up time is less than 28 seconds. The printer supports multicopying or stacking for up to 99 copies. It can also reduce up to 25 % of the original and enlarge up to 400 % of the original.

The primary means of connectivity to this device is through the standard USB 2.0 hi-speed port. The supported Windows printer drivers OS versions also include that of Windows 2000 professional and XP home edition. Others include XP professional, Vista, and Windows 7. For users of Apple systems, the supported OS versions include OS X 10.4.11, 10.5.x and 10.6.x. Download Brother DCP-7060D driver from Brother Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver