Brother MFC-5460CN driver

The print engine for this device is the color inkjet print technology while scanning process uses the CIS scanning method. The dimensions comprise of a depth of 15.5 inches, a height of 8.9 inches and a width of 17.3 inches. All these dimensions contribute to a weight of 19.8 lbs while there is an interactive user interface on the device.

Brother MFC-5460CN driver Supported Windows Operating Systems

Brother MFC-5460CN driver Supported Mac Operating Systems

Specifications

There is an input paper tray with this printer, and it can hold up to 100 sheets of plain paper while the output tray can hold up to 50 sheets of printed papers. The standard paperweight should also remain at 80 gsm. The printer supports an automatic document feeder (ADF) that helps the input tray by holding an additional 35 pages of plain sheets for the printing process.

The primary means of connecting this printer to a PC is through the standard USB 2.0 port full speed, and the other one is through the Ethernet LAN network port. The applicable component for the latter will be the Ethernet 10/100 Base-TX. The device also has an inner memory capacity of 32 MB of RAM while it supports an external TAD interface too.

The operating conditions of the printer include a temperature range between 10 and 35⁰C for under normal conditions and for best print quality, it requires between 20 and 33⁰C. Apart from temperature, there is also a required humidity level which is between 20 and 80% without condensation both for normal operations and best print quality.

This printer supports speed dialing to 100 locations during the faxing operations, an error correction mode (ECM), remote access, and fax forwarding. Other features include a broadcasting feature that can work up to 150 locations at maximum and a dual access compatibility. The modem speed for sending r receiving fax messages is about 33600 bps while the transmission speed is about 3 seconds. Download Brother MFC-5460CN driver from Brother Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver